Skip to offer

    “Win a complete part optimization.”

    Distortion mitigation, process-parameter optimization, and robot-path checks.

    What our solution can do

    Figure 25: 3D scan-to-CAD deviation map of the optimized flange, with its original −0.750 to +0.750 mm scale.Figure 25
    Table 8: original and optimized WLAM annual economics for the flange, assuming 2,400 parts per year.
    ParameterOriginalOptimized
    Variable cost / year$105k$37k
    Manufacturing time / year2,600 h740 h
    Table 8: additional results and original versus optimized parameters for the flange.
    ParameterOriginalOptimized
    Reported cost reduction—64.4%
    Trial and errorYesNo
    Robot speed (mm/s)7.5020.0
    Wire feed rate (mm/s)11.46Predicted
    Laser power (W)1,024Predicted
    Layer height (mm)1.20Simulated
    Layer width (mm)1Simulated
    Figure 29: scan-to-CAD deviation map of the optimized hollow cylinder, with its original −0.750 to +0.750 mm scale.Figure 29
    Table 9: original and optimized WLAM annual economics for the cylinder, assuming 2,400 parts per year.
    ParameterOriginalOptimized
    Variable cost / year$219k$123k
    Manufacturing time / year5,332 h2,700 h
    Table 9: additional results and original versus optimized parameters for the cylinder.
    ParameterOriginalOptimized
    Reported cost reduction—43.5%
    Trial and errorYesNo
    Robot speed (mm/s)10.013.0
    Wire feed rate (mm/s)15.28Predicted
    Laser power (W)662Predicted
    Layer height (mm)0.60Simulated
    Layer width (mm)2.00Simulated
    Cooling time9 s / layer45 s / 11 layers
    Figure 34: whole-part deviation map after printing and cooling, with the original doubled −1.500 to +1.500 mm scale showing residual distortion.Figure 34
    Table 10: original and optimized WLAM annual economics for the screw, assuming 2,400 parts per year.
    ParameterOriginalOptimized
    Variable cost / year$83.5k$64.9k
    Manufacturing time / year2,108 h1,600 h
    Table 10: additional results and original versus optimized parameters for the screw.
    ParameterOriginalOptimized
    Reported cost reduction—22.3%
    Trial and errorYesNo
    Robot speed (mm/s)7.5010.00
    Wire feed rate (mm/s)11.46Predicted
    Laser power (W)1,024Predicted
    Layer height (mm)1.20Simulated
    Layer width (mm)1.00Simulated
    Cooling / 3 layersNone20 s
    Cooling / perimeterNone10 s

    Reported variable costs at 2,400 parts/year: wire, shielding gas, and electrical energy. Case-specific results; excludes full ownership cost.

    Jochman et al. · 2026 Read the source paper

    Showing Flange, case 1 of 3.

    Optin and be among the three to win the free part optimization.

    3 qualified teams. One real part each.